Robart 622 Retracts Diagram

The view below is the average setup of a Robart 622 retract setup in a Jack Devine model.  We provide this layout so you can get an idea of the way it fits and installs into your model.  

We are often asked by our customers to send extra copies of the multi-views because they have been lost.  We've decided to help our customers with that!  Please be patient, and within ten minutes you'll have the multi-views of the kit that you're building, or the kit that you want to build!  It takes an average of 5 to 7 minutes for a multi-view  page to download on regular Dial-up, because the files are quite large.   We want to make sure your printout is top-quality.  Once download is complete and you can see the multi-views, right click on the view, chose save as, and save it to your computer.  Once you have it, you can print it out anytime you want!

  When you're done, just go to the link photos at the bottom of the page and head back to whatever part of our website you wish to go to!



Foam Building Techniques
using Jack Devine's
Foam Bond Cement
Links to
other R/C Sites!

About Us here at Jack Devine Models
Joining Balsa Sheets
Building Techniques

Take me to the Order Page!

Most Commonly asked Questions and Building Tips

Come chat in the chatroom!  Click here to go to our chatroom.

Questions for Jack Devine?

Check out these other Jack Devine Models!  
Just Pick, Click, and FLY to their page!




Jack Devine Models
14906 114th Ave. N.E.
Kirkland, WA        98034 - 1031

Business and Information line:  1- 425 - 822 - 8130

Toll-Free Order Line (Not for information): 1- 800- 897- 0717